What does RH Conveyors specialise in?
Read answer ▾
RH Conveyors designs and manufactures conveyor belt cleaning systems, including scrapers and brush cleaners. We specialise in cleaning belts that standard systems struggle with — particularly chevron, cleated, flat and clip-jointed belts — across demanding industrial environments.
What types of conveyor belts can your systems clean?
Read answer ▾
Our systems are designed to work on:
Flat conveyor belts
Chevron belts
Cleated belts (including inclined belts)
Belts with metal fasteners or clip joints
Reversing belts and belts running at varying speeds
If your belt setup is unusual or difficult to clean, we can also design a bespoke solution.
How are your scrapers different from standard belt cleaners?
Read answer ▾
Most standard scrapers use fixed blades that struggle with belt profiles, clip joints, or uneven wear. RH scrapers use a patented finger-blade design that:
Flexes around cleats and belt profiles
Rolls safely over clip joints without damage
Cleans more evenly across the belt surface
Reduces wear on both the blade and the belt
This design helps reduce carryback, belt damage, and unplanned downtime.
Do your systems damage conveyor belts or cleats?
Read answer ▾
No. Our systems are specifically designed to be non-damaging.
The flexible finger-blade design allows the scraper to adapt to belt profiles, cleats, and fasteners rather than fighting against them, significantly reducing the risk of belt wear or cleat damage.
What is the Duplex Cleated Belt Scraper used for?
Read answer ▾
The RH Duplex Cleated Belt Scraper is designed specifically for cleated belts, particularly in recycling, biomass, and waste applications.
It is the only fixed scraper system designed to clean cleated belts effectively, using a two-blade finger system that flexes around horizontal cleats without damage.
Do you offer brush cleaners as well as scrapers?
Read answer ▾
Yes. We supply static brush cleaners that work alongside scrapers to remove material that blades can’t fully clear.
Primary brush cleaners support scrapers near the head pulley, removing moist or cohesive fines.
Secondary brush cleaners are installed further along the return side to remove dry particulates and reduce roller build-up.
All brush systems are fixed-position with no motors or moving parts, keeping maintenance simple.
Can you provide bespoke or custom belt cleaning systems?
Read answer ▾
Absolutely. Many of our products started as bespoke solutions.
We regularly design custom systems for:
Tight or awkward installation spaces
Unusual belt widths or profiles
Complex pulley arrangements
Multiple cleaning zones
Sites where previous scrapers caused damage
If a standard product won’t work, we’ll help design one that will.
Which industries do you work with?
Read answer ▾
We supply belt cleaning systems across a wide range of industries, including:
Waste & recycling
Biomass & energy
Quarrying & mining
Agriculture & grain handling
Materials processing
Shipping loaders and bulk terminals
If your industry isn’t listed, chances are we’ve worked on something similar.
Are your products made in the UK?
Read answer ▾
Yes. All RH scrapers and brush cleaners are manufactured in-house in the UK.
We control quality throughout the process and supply customers throughout the UK and internationally, including Australia, Canada, Europe, and South Africa.
What information do you need to provide a quote?
Read answer ▾
The more detail you can share, the better — but you don’t need everything to get started.
Helpful information includes:
Belt type (flat, chevron, cleated)
Belt width and speed
Material being conveyed
Any issues you’re experiencing (carryback, wear, downtime)
Photos or drawings of the conveyor (if available)
Even a rough description is enough for us to advise on next steps.
What does RH Conveyors specialise in?
Read answer ▾
RH Conveyors designs and manufactures conveyor belt cleaning systems, including scrapers and brush cleaners. We specialise in cleaning belts that standard systems struggle with — particularly chevron, cleated, flat and clip-jointed belts — across demanding industrial environments.
What types of conveyor belts can your systems clean?
Read answer ▾
Our systems are designed to work on:
Flat conveyor belts
Chevron belts
Cleated belts (including inclined belts)
Belts with metal fasteners or clip joints
Reversing belts and belts running at varying speeds
If your belt setup is unusual or difficult to clean, we can also design a bespoke solution.
How are your scrapers different from standard belt cleaners?
Read answer ▾
Most standard scrapers use fixed blades that struggle with belt profiles, clip joints, or uneven wear. RH scrapers use a patented finger-blade design that:
Flexes around cleats and belt profiles
Rolls safely over clip joints without damage
Cleans more evenly across the belt surface
Reduces wear on both the blade and the belt
This design helps reduce carryback, belt damage, and unplanned downtime.
Do your systems damage conveyor belts or cleats?
Read answer ▾
No. Our systems are specifically designed to be non-damaging.
The flexible finger-blade design allows the scraper to adapt to belt profiles, cleats, and fasteners rather than fighting against them, significantly reducing the risk of belt wear or cleat damage.
What is the Duplex Cleated Belt Scraper used for?
Read answer ▾
The RH Duplex Cleated Belt Scraper is designed specifically for cleated belts, particularly in recycling, biomass, and waste applications.
It is the only fixed scraper system designed to clean cleated belts effectively, using a two-blade finger system that flexes around horizontal cleats without damage.
Do you offer brush cleaners as well as scrapers?
Read answer ▾
Yes. We supply static brush cleaners that work alongside scrapers to remove material that blades can’t fully clear.
Primary brush cleaners support scrapers near the head pulley, removing moist or cohesive fines.
Secondary brush cleaners are installed further along the return side to remove dry particulates and reduce roller build-up.
All brush systems are fixed-position with no motors or moving parts, keeping maintenance simple.
Can you provide bespoke or custom belt cleaning systems?
Read answer ▾
Absolutely. Many of our products started as bespoke solutions.
We regularly design custom systems for:
Tight or awkward installation spaces
Unusual belt widths or profiles
Complex pulley arrangements
Multiple cleaning zones
Sites where previous scrapers caused damage
If a standard product won’t work, we’ll help design one that will.
Which industries do you work with?
Read answer ▾
We supply belt cleaning systems across a wide range of industries, including:
Waste & recycling
Biomass & energy
Quarrying & mining
Agriculture & grain handling
Materials processing
Shipping loaders and bulk terminals
If your industry isn’t listed, chances are we’ve worked on something similar.
Are your products made in the UK?
Read answer ▾
Yes. All RH scrapers and brush cleaners are manufactured in-house in the UK.
We control quality throughout the process and supply customers throughout the UK and internationally, including Australia, Canada, Europe, and South Africa.
What information do you need to provide a quote?
Read answer ▾
The more detail you can share, the better — but you don’t need everything to get started.
Helpful information includes:
Belt type (flat, chevron, cleated)
Belt width and speed
Material being conveyed
Any issues you’re experiencing (carryback, wear, downtime)
Photos or drawings of the conveyor (if available)
Even a rough description is enough for us to advise on next steps.
How do I get started?
Simply get in touch.
We’ll talk through your conveyor setup, recommend the most effective solution, and provide a no-obligation quote. If a standard system won’t work, we’ll tell you — and help design one that will.